A Versatile Theranostic Nanoemulsion for Architecture‐Dependent Multimodal Imaging and Dually Augmented Photodynamic Therapy

To design a clinically translatable nanomedicine for photodynamic theranostics, the ingredients should be carefully considered. A high content of nanocarriers may cause extra toxicity in metabolism, and multiple theranostic agents would complicate the preparation process. These issues would be of less concern if the nanocarrier itself has most of the theranostic functions. In this work, a poly(ethylene glycol)‐boron dipyrromethene amphiphile (PEG‐F₅₄‐BODIPY) with 54 fluorine‐19 (¹⁹F) is synthesized and employed to emulsify perfluorohexane (PFH) into a theranostic nanoemulsion (PFH@PEG‐F₅₄‐BODIPY). The as‐prepared PFH@PEG‐F₅₄‐BODIPY can perform architecture‐dependent fluorescence/photoacoustic/¹⁹F magnetic resonance multimodal imaging, providing more information about the in vivo structure evolution of nanomedicine. Importantly, this nanoemulsion significantly enhances the therapeutic effect of BODIPY through both the high oxygen dissolving capability and less self‐quenching of BODIPY molecules. More interestingly, PFH@PEG‐F₅₄‐BODIPY shows high level of tumor accumulation and long tumor retention time, allowing a repeated light irradiation after a single‐dose intravenous injection. The “all‐in‐one” photodynamic theranostic nanoemulsion has simple composition, remarkable theranostic efficacy, and novel treatment pattern, and thus presents an intriguing avenue to developing clinically translatable theranostic agents.     

DNAN及TNT基熔铸炸药综合性能比较

为了对比载体炸药2,4,6-三硝基甲苯(TNT)和2,4-二硝基苯甲醚(DNAN)、以及以它们为基的熔铸炸药的综合性能,系统研究了DNAN和TNT、以及DNAN/HMX(20/80)和TNT/HMX(25/75)熔铸炸药的流变、能量、安全、以及力学等性能。结果表明:载体炸药DNAN(6.87 m Pa·s)的粘度低于TNT(9.05 mPa·s),DNAN/HMX熔铸体系的极限固含量(约80%)高于TNT/HMX熔铸体系(约75%);DNAN/HMX(20/80)和TNT/HMX(25/75)熔铸炸药的爆速分别为8336 m·s~(-1)和8452 m·s~(-1),爆压分别为31.03 GPa和31.44 GPa;在1 K·min~(-1)的慢速烤燃条件下,DNAN/HMX(20/80)和TNT/HMX(25/75)熔铸炸药的响应等级分别为燃烧反应和爆炸反应;在4.51GPa的冲击波入射压力条件下,TNT/HMX(25/75)在8～12 mm内达到完全爆轰,而DNAN/HMX(20/80)在12 mm内未能达到完全爆轰;DNAN/HMX(20/80)的抗拉和抗压强度均大于TNT/HMX(25/75)。因此可以得出结论,在能量性能基本持平的情况下,DNAN/HMX(20/80)熔铸炸药的安全及力学性能优于TNT/HMX(25/75)熔铸炸药。     

An unsafe behaviour formation mechanism based on risk perception

It is commonly acknowledged that human behaviour is implicated in most safety problems. However, research on the formation mechanism of unsafe behaviour remains incomplete. Risk perception is one of the fundamental issues in risk research, and individual risk perception can be identified as a critical antecedent of human behaviour. This study attempts to construct and test a theoretical model to reveal the formation mechanism of unsafe behaviour based on risk perception. First, to lay a solid foundation for the developed new mechanism, several key concepts about risk perception and unsafe behaviour were explained. Second, the formation mechanism of biases in individual risk perception was developed based on psychological distance theory, and the biases in risk perception were subsequently classified. Lastly, an unsafe behaviour formation mechanism was put forward based on risk perception as an explanatory variable. This study is novel in that it uses psychological distance to explore the formation of biases in individual risk perception. Further, the presented work provides a new approach to understanding and explaining the formation mechanism of human unsafe behaviour.     

高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

矿井地面风硐的改造方案比选与施工

为解决通风系统改造后原地面风硐断面偏小、风速超限的问题,通过在原有地面风硐东侧并联一道钢制矩形通风管道的方法,从而增加风硐断面积,降低风硐内的风速和通风阻力,效果明显。     

基于临界钙矾石膨胀破坏的磷石膏基复合胶凝材料的配料计算研究

为制备大掺量磷石膏基复合胶凝材料,在确定主要水化产物类型的基础上,通过计算临界钙矾石膨胀破坏的边界条件,确定各组分最佳掺量范围,研究其对复合胶凝材料力学性能、干缩性能的影响,并通过X射线衍射（XRD）、扫描电镜（SEM）等测试方法研究水化产物的组成及发展规律。研究结果表明：通过理论配料计算,矿粉掺量为50%（质量分数）时,最大磷石膏掺量为26.3%（质量分数）,最小熟料掺量为23.6%（质量分数）。最佳配比组28 d胶砂抗压强度为45.2 MPa,线膨胀率小于0.04%;对比组28 d抗压强度仅有36.4 MPa,线膨胀率远大于0.04%。XRD、SEM表征结果表明,磷石膏基复合胶凝材料的水化产物主要是钙矾石（AFt）和水化硅酸钙（C-S-H）凝胶,氢氧化钙几乎反应完全;对比组钙矾石生成量远大于最佳配料组,微观结构存在大量裂缝。这说明理论配料计算可以有效用于磷石膏基复合胶凝材料的配比优化。     

淀粉/聚乙烯醇活性包装薄膜及其在食品包装应用中的研究进展

综述了淀粉/聚乙烯醇（PVA）活性包装薄膜及其在食品包装中的研究进展，主要对从不同比例共混、疏水改性、增强改性等方面对淀粉/PVA薄膜的改性研究，从功能特性和活性物质对薄膜性能的影响2个方面对淀粉/PVA活性薄膜研究和薄膜在食品包装中的应用3个方面进行了归纳总结，旨在为以淀粉/PVA为基材的活性包装薄膜研究提供参考。     

提高Mn系低温脱硝催化剂抗硫抗水性能的国内外研究概述

介绍了氮氧化物的来源、SCR脱硝的反应机理和工艺流程、催化剂的硫和水中毒机理,重点介绍了国内外学术和工业界为提高催化剂抗硫和抗水性能所做的研究和尝试,旨在推动低温SCR技术的进展,促进该技术早日实现在工业上的大规模应用。     

基于InSAR技术和SA-SVR算法的矿区沉降预测模型

为了解决矿区沉降预测模型精度低、预测模型与实际开采情形不符的问题，提出了一种基于合成孔径雷达干涉测量（Synthetic Aperture Radar Interferometry，InSAR）技术、支持向量回归算法 （Support Vector Regression，SVR）以及模拟退火算法（Simulated Annealing，SA）相结合的新型矿区沉降预测模型。首先，以InSAR技术获取矿区沉降监测数据，对数据进行处理得到测试点的累计沉降量，并将 其与GPS实际测量结果进行比较，发现二者吻合性较好。然后，进行矿区沉降预测模型构建，通过SVR算法得到静态沉降预计模型，再利用SA算法得到模型中的参数最优取值。为了使预测数据符合矿区开采实际情况， 引入嵌入维数公式，得到矿区沉降预测动态模型及精度评价指标。最后，将构建的沉降动态模型应用于陕西省大柳塔矿区，得到预测值和实际监测值之间绝对误差的最大值为9 mm，相对误差的最大值为3%；模型评价 指标通过计算得到试验区平均绝对误差的最大值为2.5%，最小的相关性指数为0.8，表明该模型预测精度较高。